???<!-- GIF89;a -->
123123123123
.....................................................................................................................................???<!-- GIF89;a -->
123123123123
.....................................................................................................................................          D     l      8     9     @     G  '   P     x  *   {  %          M        "     3     B      P      q            6     b        ^  -   ~             3     J        g     {  +     -     F     d   6  C     5     <     `   R       %     ?        8  !   M  ?   o  3     6     /     3   J     ~       5     *     =     @   B       `     =   e  6     5     /     D   @  n     Y     W   N  W               @   0  "   q  (     /     $     (     (   ;  (   d  #     "     /     .     %   3  A   Y  ?     +     ,     ,   4     a  *   h  9     ;     /   	  "   9  9   \       "                      /     ,     )        F  ?   T  9     4     0     1   4  9   f       <          '     $   @  !   e  L          ^     G   ;   Z      >      0   !  7   N!  4   !  F   !  6   "  /   9"  $   i"  &   "     "     "  4   "  1    #  1   R#     #  .   #  3   #  ,   $    2$  
   %  
   %  	   %  *   %     #&  ,   &&     S&     r&  ?   z&     &     &     &  "   &  %   '  %   .'     T'  ,   f'  z   '     (  '    (     H(     a(  ;   }(  A   (     (     )  '   $)  ,   L)  :   y)  c   )  :   *  +   S*  8   *  Z   *     +     .+  A   L+     +     +  G   +  4   ,  /   C,  -   s,     ,     ,     ,  4   ,  +   -  ;   ?-  >   {-     -  g   >.  6   .  C   .  =   !/  .   _/  K   /  h   /  J   C0  J   0  M   0     '1     B1  9   \1  #   1  '   1  0   1  !   2  %   52  &   [2  %   2  !   2     2  -   2  1   3  #   J3  3   n3  B   3  %   3  $   4  +   04     \4  %   c4  >   4  8   4  2   5  +   45  9   `5     5     5  %   5  *   5      6  #   6  #   6      7     &7  =   37  5   q7  1   7  2   7  3   8  ;   @8     |8  >   8      8  )   8  &    9  !   G9  9   i9     9  i   9  B   :  Z   W:  7   :  -   :  4   ;  3   M;  H   ;  3   ;  -   ;  !   ,<  (   N<     w<     <  4   <  -   <  )   =     <=  1   \=  5   =  /   =     M      N         P           G   D          &   @   #   *       0      c   -   =          K                  y   k       |   8           B   $   n          t         >       W   3   r       V   ]   _             .   o   z   5         m   u   s   	          w      ?       q   +       `       (       l            ;   <   :   \           p       T   g          L       H   F   2   b      v   ,   9   }           a   E   6   h       '   U   /   
   C   1       [          Q       ^   %   I           j                                 i   X   7      f          S   A             "   d       R   )       4             e          Y   J       O   ~   !   x      Z      {                OK    done.  failed.  failed; no link present.  Check cable? $* $0: Usage: daemon [+/-nicelevel] {program} $0: configuration for ${1} not found. $STRING $alias device ${DEVICE} does not seem to be present, delaying initialization. $base $killlevel $base shutdown $base startup ${base} (pid $pid) is running... ${base} dead but pid file exists ${base} dead but subsys locked ${base} is stopped ${base} status unknown due to insufficient privileges. 'No route to host' adding route '$networkipv6' via gateway '$gatewayipv6' through device '$device' 6to4 configuration is not valid Bridge support not available: brctl not found Bringing up interface $i:  Bringing up loopback interface:  Cannot add IPv6 address '$address' on dev '$device' Cannot enable IPv6 privacy method '$IPV6_PRIVACY', not supported by kernel Configured devices: Currently active devices: Determining IP information for ${DEVICE}... Determining IPv6 information for ${DEVICE}... Device ${DEVICE} does not seem to be present, delaying initialization. Device ${DEVICE} has MAC address ${FOUNDMACADDR}, instead of configured address ${HWADDR}. Ignoring. Device ${DEVICE} has different MAC address than expected, ignoring. Device '$DEVICE' is already up, please shutdown first Device '$DEVICE' isn't supported as a valid GRE device name. Device '$DEVICE' isn't supported here, use IPV6_AUTOTUNNEL setting and restart (IPv6) networking Device '$device' doesn't exist Device '$device' enabling didn't work Device 'tun6to4' (from '$DEVICE') is already up, shutdown first Disabling netconsole ERROR: ${DEVICE} did not come up! ERROR: could not add vlan ${VID} as ${DEVICE} on dev ${PHYSDEV} Error adding address ${ipaddr[$idx]} for ${DEVICE}. Error adding default gateway ${GATEWAY} for ${DEVICE}. Error adding default gateway for ${REALDEVICE}. Error occurred while calculating the IPv6to4 prefix FAILED Failed to bring up ${DEVICE}. Given IPv4 address '$ipv4addr' is not globally usable Given IPv6 MTU '$ipv6_mtu' is out of range Given IPv6 default device '$device' doesn't exist or isn't up Given IPv6 default device '$device' requires an explicit nexthop Given IPv6 default gateway '$address' has scope '$device_scope' defined, given default gateway device '$device' will be not used Given IPv6 default gateway '$address' is link-local, but no scope or gateway device is specified Given IPv6 default gateway '$address' is not in proper format Given address '$addr' is not a global IPv4 one (arg 1) Given address '$addr' is not a valid IPv4 one (arg 1) Given device '$device' is not supported (arg 1) Given pidfile '$pidfile' doesn't exist, cannot send trigger to radvd Given remote address '$addressipv4tunnel' on tunnel device '$device' is already configured on device '$devnew' Global IPv6 forwarding is disabled in configuration, but not currently disabled in kernel Global IPv6 forwarding is enabled in configuration, but not currently enabled in kernel IPv6to4 configuration needs an IPv4 address on related interface or otherwise specified Initializing netconsole Invalid tunnel type $TYPE Legacy static-route support not available: /sbin/route not found Missing config file $PARENTCONFIG. Missing parameter 'IPv4 address' (arg 1) Missing parameter 'IPv4-tunnel address' (arg 2) Missing parameter 'IPv6 MTU' (arg 2) Missing parameter 'IPv6-address' (arg 2) Missing parameter 'IPv6-gateway' (arg 2) Missing parameter 'IPv6-network' (arg 1) Missing parameter 'address' (arg 1) Missing parameter 'device' (arg 1) Missing parameter 'global IPv4 address' (arg 2) Missing parameter 'local IPv4 address' (arg 2) Missing parameter 'selection' (arg 2) Missing remote IPv4 address of tunnel, configuration is not valid No 802.1Q VLAN support available in kernel for device ${DEVICE} No 802.1Q VLAN support available in kernel. No parameters given to setup a default route No reason given for sending trigger to radvd PASSED PHYSDEV should be set for device ${DEVICE} Pidfile '$pidfile' is empty, cannot send trigger to radvd Please restart network with '/sbin/service network restart' Reloading $prog configuration (via systemctl):  Restarting $prog (via systemctl):  Server address not specified in /etc/sysconfig/netconsole Shutting down interface $i:  Shutting down loopback interface:  Starting $prog (via systemctl):  Stopping $prog (via systemctl):  The service command supports only basic LSB actions (start, stop, restart, try-restart, reload, force-reload, status). For other actions, please try to use systemctl. Tunnel device '$device' bringing up didn't work Tunnel device '$device' creation didn't work Tunnel device 'sit0' enabling didn't work Unknown error Unsupported mechanism '$mechanism' for sending trigger to radvd Unsupported reason '$reason' for sending trigger to radvd Unsupported selection '$selection' specified (arg 2) Usage: $0 {start|stop|reload|restart|showsysctl} Usage: $0 {start|stop|status|restart|condrestart} Usage: $0 {start|stop|status|restart|reload|force-reload} Usage: ifup <configuration> Usage: killproc [-p pidfile] [ -d delay] {program} [-signal] Usage: pidfileofproc {program} Usage: pidofproc [-p pidfile] {program} Usage: status [-p pidfile] {program} Users cannot control this device. Using 6to4 and RADVD IPv6 forwarding usually should be enabled, but it isn't WARNING Warning: configured MTU '$IPV6TO4_MTU' for 6to4 exceeds maximum limit of '$tunnelmtu', ignored Warning: interface 'tun6to4' does not support 'IPV6_DEFAULTGW', ignored Warning: ipppd (kernel 2.4.x and below) doesn't support IPv6 using encapsulation 'syncppp' Warning: link doesn't support IPv6 using encapsulation 'rawip' error iN $FILE: didn't specify netmask or prefix error in $FILE: IPADDR_START and IPADDR_END don't agree error in $FILE: IPADDR_START greater than IPADDR_END error in $FILE: already seen device $parent_device:$DEVNUM in $devseen error in $FILE: already seen ipaddr $IPADDR in $ipseen error in $FILE: didn't specify device or ipaddr error in $FILE: invalid alias number error in ifcfg-${parent_device}: files netconsole module loaded netconsole module not loaded netconsole: can't resolve MAC address of $SYSLOGADDR radvd control enabled, but config is not complete radvd not (properly) installed, triggering failed usage: ifdown <configuration> usage: ifdown-routes <net-device> [<nickname>] usage: ifup-aliases <net-device> [<parent-config>]
 usage: ifup-routes <net-device> [<nickname>] Project-Id-Version: PACKAGE VERSION
Report-Msgid-Bugs-To: 
POT-Creation-Date: YEAR-MO-DA HO:MI+ZONE
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
PO-Revision-Date: 2016-03-02 08:55-0500
Last-Translator: Leah Liu <lliu@redhat.com>
Language-Team: Chinese (China) <trans-zh_cn@lists.fedoraproject.org>
Language: zh-CN
Plural-Forms: nplurals=1; plural=0;
X-Generator: Zanata 3.9.6
   确定    完成。 失败。 失败：不存在链接。检查电缆？ $* $0: 用法：daemon [+/-nicelevel] {program} $0： 未发现 ${1} 配置。 $STRING $alias 设备 ${DEVICE} 似乎不存在，推迟其初始化。 $base $killlevel $base 关闭 $base 启动 ${base} (pid $pid) 正在运行... ${base} 已死，但 pid 文件存在 ${base} 已死，但是 subsys 被锁 已停止 ${base} 由于权限不足，${base} 状态未知。 “ 没有到达主机的路由” 正在添加经过网关 '$gatewayipv6' 通过设备 '$device' 的路由 '$networkipv6' 6to4 配置无效 网桥支持不可用：未找到 brctl 正在打开接口 $i： 正在打开环回接口： 无法在设备 '$device' 上添加 IPv6 地址 '$address'  无法启用 IPv6 私有方法 '$IPV6_PRIVACY' ，内核不支持 已配置设备： 当前活跃设备： 正在确定 ${DEVICE} 的 IP 信息... 正在确定 ${DEVICE} 的 IPv6 信息...... 设备 ${DEVICE} 似乎不存在, 延迟初始化操作。 设备 ${DEVICE} 具有 MAC 地址 ${FOUNDMACADDR}，而不是配置的地址 ${HWADDR}。忽略。  ${DEVICE} 设备的 MAC 地址与预期不符，忽略。 设备“$DEVICE”已打开，请先关闭 设备 '$DEVICE' 不是受支持的有效 GRE 设备名. 在此处不支持设备 '$DEVICE' ，使用 IPV6_AUTOTUNNEL 设置并重启 (IPv6) 联网 设备 '$device' 不存在 设备 '$device' 启用无效 设备 'tun6to4'（来自 '$DEVICE'）已在运行，请先关闭 正在禁用 netconsole 错误：${DEVICE} 未出现！ 错误：无法在 dev ${PHYSDEV}上将 vlan ${VID} 添加为 ${DEVICE} 为 ${DEVICE} 添加地址 ${ipaddr[$idx]} 出错。 为 ${DEVICE} 添加地址 ${GATEWAY} 出错。 为 ${REALDEVICE} 添加默认网关出错。 IPv6to4 前缀计算出错 失败 启动 ${DEVICE} 失败。 给定 IPv4 地址 '$ipv4addr' 不是全局通用的 给定的 IPv6 MTU '$ipv6_mtu' 超出范围 指定的 IPv6 默认设备 '$device' 不存在或未启动 给定的 IPv6 默认设备 '$device' 需要明确的下一跳 给定的 IPv6 默认网关 '$address' 具有已定义的范围 '$device_scope' ， 给定的网关设备 '$device' 将不再使用 给定的 IPv6 默认网关 '$address' 是链路本地地址， 但是没有指定范围或网关设备 指定的 IPv6 默认网关 '$address' 格式不正确 所给的地址 '$addr' 不是全局通用的 IPv4 地址 (参数1) 给定地址“$addr”不是有效 IPv4 地址（参数 1） 不支持给定的设备 '$device'  (参数 1) 给定的 pid 文件 '$pidfile' 不存在， 无法发送触发器给 radvd 在隧道设备 '$device' 上指定的远端地址 '$addressipv4tunnel' 已在设备 '$devnew' 上配置 IPv6 全局转发已在配置中禁用，但当前未在内核中禁用。 IPv6 全局转发已在配置中启用，但当前未在内核中启用。 IPv6to4 配置需要一个在相关接口上的 IPv4 地址或另外指定。 正在初始化 netconsole 隧道类型 $TYPE 无效 旧的静态路由支持不可用：未找到 /sbin/route 缺少配置文件 $PARENTCONFIG。 缺少参数 'IPv4 address'  (参数 1) 缺少参数“IPv4 隧道地址” ( 参数2） 缺少参数 'IPv6 MTU' (参数2) 缺少参数 'IPv6-address' (参数2) 缺少参数 'IPv6-gateway'  (参数2) 缺少参数 'IPv6-network' (参数1) 缺少参数 'address'  (参数1) 缺少参数 'device' (参数1) 缺少参数 'global IPv4 address'  (参数2) 缺少参数“本地 IPv4 地址”（参数2） 缺少参数 'selection'  (参数2) 缺少隧道的远程 IPv4 地址，配置无效！ 在内核中未提供对设备 ${DEVICE} 的 802.1Q VLAN 支持。 内核中没有 802.1Q VLAN 支持。 设置默认路由的参数未给定 未给出发送触发器给 radvd 的理由 通过 应为设备 ${DEVICE} 设定 PHYSDEV pidfile '$pidfile' 无内容， 无法发送触发器给 radvd 请使用“/sbin/service network restart”重启网络 正在重载 $prog 配置（透过 systemctl）： 正在重启 $prog（通过 systemctl）： 服务器地址未在 /etc/sysconfig/netconsole 中指定 正在关闭接口 $i： 正在关闭环回接口： 正在启动 $prog (via systemctl)： 正在停止$prog（透过 systemctl）： service 命令只支持基础 LSB 动作（即 start、stop、restart、try-restart、reload、force-reload、status）。其他动作请使用 systemctl。 隧道设备 '$device' 启动失败 隧道设备 '$device' 创建无效 隧道设备 'sit0' 启动无效 未知错误 不支持“$mechanism”机制用于发送触发器给 radvd 不支持以原因 '$reason' 发送触发器给 radvd 不支持指定的 '$selection' 选项 (参数 2) 用法：$0 {start|stop|reload|restart|showsysctl} 用法：$0 {start|stop|status|restart|condrestart} 用法：$0 {start|stop|status|restart|reload|force-reload} 用法：ifup <设备名> 用法：killproc [-p pidfile] [ -d delay] {program} [-signal] 用法：pidfileofproc {program} 用法：pidofproc [-p pidfile] {program} 用法：status [-p pidfile] {program} 用户不能控制这一设备。 通常应启用 6to4 和 RADVD IPv6 转发，但未启用 警告 警告：为 6to4 配置的 MTU“$IPV6TO4_MTU”超过了 “$tunnelmtu”的最大限值，已忽略。 警告：接口“tun6to4”不支持“IPV6_DEFAULTGW”，忽略 警告：ipppd（内核 2.4.x 及更低版本）不支持使用封装“syncppp”的 IPv6 警告：链接不支持使用封装“rawip”的 IPv6 $FILE 出错：位指定子网掩码或前缀 $FILE 中出错：IPADDR_START 和 IPADDR_END 不符 $FILE 中的错误：IPADDR_START 大于 IPADDR_END $FILE 错误：已见设备 $parent_device：在 $devseen 中的 $DEVNUM $FILE 中出错：$ipseen 中有 IP 地址 $IPADDR  $FILE 中出错：device 或 ipaddr 未指定 $FILE 中出错：无效别名数 ifcfg-${parent_device} 中: 文件出错 已载入 netconsole 模块 未加载 netconsole 模块 netconsole：无法解析 $SYSLOGADDR 的 MAC 地址 radvd 控制已启用，但其配置不完整 未 (正确) 安装 radvd， 触发失败 用法：ifdown <configuration> 用法： ifdown-routes <net-device> [<nickname>] 用法：ifup-aliases <net-device> [<parent-config>]
 用法： ifup-routes <net-device> [<nickname>] 